What Is a 100G CFP Transceiver?
A 100G CFP transceiver is the original large 100G pluggable module. This guide explains CFP, CFP2 and CFP4, the common 100GBASE types, and when to keep, replace or confirm one before ordering.

The short answer
A 100G CFP transceiver is a hot-pluggable optical module that turns one 100 Gigabit Ethernet port into a fiber link. The name comes from the Latin centum, meaning one hundred: CFP stands for 100G Form-factor Pluggable. It was the first widely used pluggable form factor built for 100G, and it is still found in older routers, transport gear and aggregation switches that were designed around CFP cages.
If you are holding a CFP module today, the practical question is rarely what the letters stand for. It is whether that module fits the port in front of you, matches the fiber and distance you need, and is worth keeping instead of moving the link to a smaller, newer form factor such as QSFP28. This guide answers those three questions in that order.
What a CFP transceiver actually does
Like any optical transceiver, a CFP module converts electrical signals from the host equipment into light for the fiber, and light back into electrical signals on receive. What makes CFP different from the smaller modules most engineers meet today is how it builds 100G inside the package.
Early CFP designs used ten electrical lanes at about 10 Gbps each. Later designs use four lanes at about 25 Gbps each. Inside some modules, a gearbox circuit aggregates the slower host-side lanes into the faster line-side lanes. That is why the same CFP cage can support different optical types, and why the module, the host port and the fiber plant all have to agree before a link will come up.
A CFP module is specified by a multi-source agreement (MSA) among manufacturers, so modules from different suppliers are meant to share the same mechanical and electrical outline. In practice, host compatibility still has to be confirmed for the exact switch or router model, because firmware and vendor coding checks vary. Confirm the exact module and host combination against the supplier datasheet before ordering.
CFP, CFP2, CFP4 and CFP8: same family, different size
CFP is a family, not a single module. Each generation is smaller and uses less power than the one before it, but the generations are not interchangeable: a CFP2 module does not fit a CFP cage, and a CFP4 module does not fit a CFP2 cage.
| Variant | Typical size (W x H x D) | Electrical lanes | Power envelope |
|---|---|---|---|
| CFP | 82 x 13.6 x 144.8 mm | 10 x 10G or 4 x 25G | Less than 24 W |
| CFP2 | 41.5 x 12.4 x 107.5 mm | 10 x 10G, 4 x 25G, 8 x 25G or 8 x 50G | Less than 12 W |
| CFP4 | 21.5 x 9.5 x 92 mm | 4 x 10G or 4 x 25G | Less than 6 W |
| CFP8 | 40 x 9.5 x 102 mm | 16 x 25G or 8 x 50G | Up to 24 W |
Dimensions and power figures above follow the CFP MSA specifications as summarized in public references. Always confirm the exact figures for the module you buy against its supplier datasheet, because power and thermal limits are set by the host equipment as well as by the module.
For a rural ISP or electric cooperative, the generation matters most when you are replacing a failed module or adding a spare. Order by cage type first: check the label on the port, the equipment manual, or the part number of the module you are replacing. A module that is electrically right but mechanically wrong will not seat, and no configuration change will fix that.
The common 100GBASE types you will actually meet
Most CFP modules in the field are one of a small set of 100GBASE types. The type decides the fiber, the connector and the reach, so it is the first thing to read off the module label.
| Type | Fiber and connector | Typical reach | What it is used for |
|---|---|---|---|
| 100GBASE-SR10 | Multimode fiber, MPO/MTP-24 | Up to about 100-150 m | Short links inside a building or data hall, using ten parallel 10G lanes |
| 100GBASE-SR4 | Multimode fiber, MPO/MTP-12 | Up to about 100-150 m | Short links using four parallel 25G lanes |
| 100GBASE-LR4 | Single-mode fiber, duplex LC | Up to 10 km | Metro and campus links, four wavelengths multiplexed inside the module |
| 100GBASE-ER4 | Single-mode fiber, duplex LC | Up to 40 km | Longer single-mode spans between sites |
| 100GBASE-ZR | Single-mode fiber, duplex LC | Up to about 80 km | Long-haul coherent links; often a vendor-specific implementation, so confirm compatibility carefully |
Reach figures are the commonly published values for each type. The reach you get on a real span depends on fiber quality, connectors, splices and loss budget, so treat the table as a starting point and confirm the loss budget for your span against the supplier datasheet.
When a CFP still makes sense, and when it does not
CFP is a legacy form factor. Newer 100G designs usually use QSFP28, which is smaller, uses less power per port and packs more ports into the same switch. That does not make every CFP module obsolete. It makes the decision a maintenance decision, not a technology contest.
Keep or replace with CFP when:
- The host equipment only has CFP cages, and replacing the chassis is not in the budget or the plan.
- You need a like-for-like spare to restore a working link quickly.
- The link, fiber and distance are already proven with that CFP type.
Look at a different form factor when:
- You are buying new switches or routers and can choose the port type.
- Port density or power and cooling are the limiting factor in the rack.
- The CFP module you need is hard to source, and the supplier confirms a QSFP28 equivalent for the new host.
Do not assume a QSFP28 module can be adapted into a CFP cage, or the other way round. The cages, connectors and electrical interfaces are different. Moving to QSFP28 means moving to equipment with QSFP28 ports.
Before you order: a five-point checklist
- Confirm the cage: CFP, CFP2, CFP4 or CFP8, from the host manual or the module being replaced.
- Confirm the optical type: SR10, SR4, LR4, ER4 or ZR, and the fiber type it requires.
- Confirm the distance and loss budget: measure or estimate the span, count the connectors and splices, and check the loss budget against the supplier datasheet.
- Confirm host compatibility: the exact switch or router model and firmware, and whether the module needs vendor-specific coding.
- Confirm power and cooling: the host can supply the module power envelope, and airflow around a large CFP module is not blocked.
Two common mistakes cause most failed CFP orders. The first is ordering by speed alone: 100G is not one module, and SR4, LR4 and ER4 are not interchangeable. The second is ordering a CFP2 or CFP4 module for a CFP cage, or the reverse, because the names look similar. Both are avoided by checking the cage and the optical type before the purchase order is raised.
Frequently asked questions
Is a CFP transceiver the same as a QSFP28 transceiver?
No. Both can carry 100G, but they are different form factors with different sizes, pin counts and cages. A CFP module fits a CFP port; a QSFP28 module fits a QSFP28 port.
Can a CFP module carry 40G as well as 100G?
Some CFP modules and hosts support 40G signals as well as 100G, depending on the module type and the host. Confirm the exact combination against the supplier datasheet rather than assuming it.
What fiber does a 100GBASE-LR4 CFP need?
Single-mode fiber with a duplex LC connector. It uses four wavelengths multiplexed inside the module, so the fiber plant and the connector type have to match the module type.
Should I stock CFP spares?
If CFP equipment is still carrying live traffic, a tested spare for each CFP type in service is worth holding, because sourcing a legacy module under outage pressure is slower and more expensive than holding one on the shelf. Confirm the spare against the host before it is needed, not during an outage.
Next step
If you are replacing a CFP module or planning a spare, start with the cage type, the optical type and the distance. As a supply-chain partner, Axonode can help confirm the option against the supplier datasheet for your host equipment. Contact us and send your platform, distance and quantity to confirm the options before ordering.


