
1GBASE-LX SFP 20km Optical Transceiver
1GBASE-LX SFP optical transceiver for 1.25Gbps single-mode links up to 20km, with a 1310nm transmitter, duplex LC interface and DDM/DOM. Price: $6 per piece.
Specifications
- Warranty
- 3-Years
- Customization
- Free OEM labeling
- Delivery Time
- 48 hours dispatch
1. Confirm the multimode link conditions first.
The Axonode 1GBASE-LX SFP 20km transceiver supports up to 1.25Gbps over duplex single-mode fiber. Confirm the fiber route and link loss, duplex LC patching, host port mode and total link length before deployment.
1G SFP Port
Confirm that the host device supports a 1G SFP port and the required compatibility coding.
Duplex LC / SMF
Use duplex LC cabling with compatible 50/125um single-mode fiber.
Reach Up to 20km
Supports up to 20km on SMF, 70m on SMF and 20m on SMF.
2. Optical specifications
| Product Type | 1GBASE-LX SFP Optical Transceiver |
| Data Rate | 0.1 to 1.25Gbps |
| Form Factor | SFP |
| Maximum Reach | 20km |
| Fiber / Connector | Single-mode fiber / Duplex LC |
| Wavelength | 1310nm; 1260-1360nm |
| Transmitter / Receiver | FP / PIN |
| Average Output Power | -9 to 0dBm |
| Receiver Sensitivity | -23dBm |
| Receiver Overload | -1dBm |
| Extinction Ratio | 9.0dB minimum |
| Power Supply | 3.3V; 3.135-3.465V; maximum current 300mA |
| DDM / DOM | Supported |
| Operating Temperature | 0 to +70 degrees C |
| Compliance | SFP+ MSA and SFF-8472; RoHS |
3. 20km single-mode 1G deployment
This transceiver is intended for 1G campus and building-to-building interconnects over duplex single-mode fiber. Confirm the installed fiber route, connector and splice losses, and total link budget before deployment.
4. Compatibility prepared for your network
Compatibility coding must be confirmed for the actual switch, server adapter or router. Share the equipment brand, exact model, software or firmware environment, port mode and DDM requirements before ordering.
5. Quality and compliance
The module is designed around the SFP electrical interface, SFP+ MSA mechanical requirements and SFF-8472 digital diagnostics. Compliance statements do not replace host-platform compatibility verification.
6. Comprehensive testing
Testing can include wavelength, transmit power, receiver response, DDM readings, host recognition and link establishment according to the product and project requirements.
Frequently Asked Questions
i. What fiber supports the full 20km reach?
Use 50/125um SMF single-mode fiber for links up to 20km. The verified limits are 70m on SMF and 20m on SMF.
ii. Does this module use simplex or duplex LC?
It uses a duplex LC interface with separate transmit and receive fibers.
iii. Can it be used on single-mode fiber?
No. This 1310nm SR module is specified for single-mode fiber. Choose a suitable 1310nm single-mode SFP for an SMF link.
iv. What should be confirmed before installation?
Confirm the host model, 1G SFP port mode, compatibility coding, fiber route and link loss, duplex LC polarity and link length.
v. Does it support DDM or DOM?
Yes. The verified record supports digital monitoring of temperature, supply voltage, bias current and optical power.
vi. Is compatibility guaranteed by the SFP form factor?
No. Mechanical fit does not prove host acceptance. Coding, port mode, software and firmware requirements must be checked for the target device.
vii. What should be checked if the link does not come up?
Check port speed, coding, LC polarity, connector cleanliness, fiber route and link loss, link length and DDM readings at both ends.
viii. Can this module operate outside 0 to +70 degrees C?
The verified commercial option is 0 to +70 degrees C. Confirm another temperature class before using it outside that range.
Downloads
The 1GBASE-LX SFP 20km technical datasheet is available on request. Share the host device model and fiber route and link loss so the correct technical information can be supplied.
Request the 1GBASE-LX SFP 20km datasheet
Confirm your 1G 20km single-mode link
Share your device model, fiber route and link loss, link length and quantity. Axonode will help review the suitable coding profile and optical configuration.
Request Compatibility Check

